BRP MAX Series - Page 33

TECHNICAL SPECIFICATIONS
MODEL
1000
STEERING
Steering wheel Adjustable tilt steering
Turning radiu
s
392 cm (154 in)
Total toe (vehicle on ground)
0° ± 0.2°
FRONT SUSPENSION
Suspension ty
pe
Double suspen
sion-arm
Suspension travel 356 mm (14 in)
Qty
2
Base HPG shocks wi
th compression and preload adjustments
Shock absorber
Type
Xrs
HPG shock with remote reservoir. Dual speed compression
damping and rebound damping adjustments
REAR SUSPEN
SION
Suspension type Torsional Trailing A-arm Independant (TTA) w ith external sway bar
Suspension travel 356 mm (14 in)
Qty
2
Base HPG shocks with compression and preload adjustments
Shock abso
rber
Type
Xrs
HPG shock with remote reservoir. Dual speed compression
damping an
d rebound damping adjustments
BRAKES
Front brake Type Dual 220mm cross-drilled disc brakes with hydraulic twin-piston calipers
Rear brak
e
Type Dual 214m
m cross-drilled disc brake with hydraulic single-piston calipers
Capacity 250 ml (8.5 U.S. oz)
Brake fluid
Type DOT 4
Caliper Floating
Front Metallic
Brake pad material
Rear Metallic
Minimum brake pad thickness 1 mm (.039 in)
Front 4 mm (.157 in)
Minimum brake disc thickness
Rear 4 mm (.157 in)
Maximum brake disc warpage 0.2 mm (.008 in)
TIRES
Front
Maximum: 138 kPa (20 PSI)
Minimum: 124 kPa (18 PSI)
Pressure
Rear
Maximum: 179 kPa (26 PSI)
Minimum: 124 kPa (18 PSI)
Minimum tire thread depth 3 mm (.118 in)
Front 27 x 9 x 12 (in)
Tire size
Rear 27 x 11 x 12 (in)
PREDELIVERY 2014-1 33 / 34