SIDE-BY-SIDE
VEHICLES
PREDELIVERY
Bulletin
July 3
rd
, 2013 Subject:Predelivery Inspection Can-Am Maverick
MAX Series
No. 2014-1
YEAR ENGINE MODEL MODEL NUMBER
SERIAL
NUMBER
Base
6LEA, 6LEC
2014 1000R
X rs/DPS 7DEA, 7DEB, 7DEC, 7DED
All
TABLE OF CON
TENTS
Page Page
IMPORTANT NOTICE ........................ 2
UNCRATING
................................... 3
..................................................... 3
Crate Cove
r Removal ........................... 3
Vehicle Removal from Crate ................... 3
PARTS TO BE INSTALLED.................. 8
Battery ............................................ 8
Shock Absorber Installation .................... 9
Disc Cleani
ng.................................... 11
Cage Installation ................................ 11
Seat Belt Installation .......................... 14
Shoulder Gu
ard installation.................... 15
Lateral Net Installation ......................... 16
Front Seats ...................................... 17
Rear Seats....................................... 1
7
Auxiliary Foam Filter Kit........................ 17
Accessories Installation........................ 17
Vehicle Deca
ls................................... 18
FLUIDS......................................... 18
Fuel ............................................... 18
Engine Oil........................................ 18
Engine Coolant.................................. 19
SET-UP......................................... 21
Tires Pressure................................... 21
Wheel Beadlo
ck ................................ 21
Protective Materials............................ 21
Recall or Factory-directed Modification...... 21
B.U.D.S. PROGRAMMING................. 21
Diagnosti
c Connector Location ............... 21
Connecting the PC to the Vehicle ............ 22
How to Establish Communication Using
B.U.D.S. Software.............................. 22
Saving Cha
nges and Exiting the B.U.D.S.
Session........................................... 25
ADJUSTMENTS ............................. 25
Suspensio
n Adjustments Guideline.......... 25
Suspension Factory Settings.................. 26
Spring Preload Adjustment (Front and Rear) 27
Shock Dampi
ng Adjustments (Front and
Rear).............................................. 27
ASSEMBLY INSPECTION .................. 29
FINAL INSP
ECTION ......................... 29
Vehicle Test Run ................................ 29
Vehicle Cle
aning ................................ 29
Delivery To Customer .......................... 29
TECHNICAL SPECIFICATIONS............ 30
Printed in Canada. (tbl2014-007 en JT)
©2013 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
1/34
®™ and the BRP logo are tradema rks of Bombardier Recreational Products Inc. or its affiliates.
To Next Page
Need help?
General