PARTS TO BE INSTALLED
tbl2013-009-017_a
TYPICAL REAR OF VEHICLE
11. Install front and rear shock absorbers. See
procedures further in this bulletin (
PARTS TO
BE INSTALLED)
.
12. P lace the shift lever on N position and carefully
move the vehicle rearward out of the crate
base.
13. Position the shifter lever on PARK and install
the required parts and accessories. Refer to
PARTSTOBEINSTALLED
.
PARTS TO BE INSTALLED
Ensure that the following parts are provided with
the vehicle.
DESCRIPTION QTY
Predeli
very kit box
1
Front sho ck absorber 2
Rear sho ck absorber 2
Cage
1
Can-Am decal (X rs model only)
1
Shoulder guard
2
Seats
2
Auxiliary fo am filter kit
1
Battery
Battery Removal
WARNING
Battery BLACK (–) lead must always be dis-
connected first and connected last. Never
charge or boost battery while installed on
vehicle.
1. Remove rear RH passenger seat.
2. Remove battery cover.
tbl2014-007-207_a
1. Battery cover
3. Remove battery holder.
tbl2014-007-208_a
1. battery holder
4. Remove the battery. Keep the bag with battery
fasteners for installation.
Battery Preparation
Refer to the
CAN-AM SIDE-BY-SIDE VEHI-
CLES BATTERIES ACTIVATION, CHARGING
AND MAINTENANCE BULLETIN (2014-1)
and
8 / 34 2014-1 PREDELIVERY
To Next Page
Loading...