2
IMPORTANT! Be sure to retain and store all installation tools and shipping brackets for
possible future use.
To unpack the DektakXT stylus surface profiling system:
1 If you purchased the separate air isolation table, assemble it using the documentation inside the crate.
2 Move the shipping boxes next to the vibration isolation table or sturdy workbench on which the system will
finally sit. During the unpacking process, this the table or bench that will hold the environmental enclosure.
Have an another large table nearby to hold the computer components and DektakXT tool as they are
unpacked.
3 The shipping boxes for your DektakXT system appear in the picture that follows. You will have at least two
boxes—one for the environmental enclosure and one for the system itself. If you purchased the computer
and monitor from Bruker, you also will have one box for each of those items. If you purchased the air
isolation table, it will arrive in a wooden crate.
To Next Page
Loading...
Need help?
General
