Bruker Fourier 300 - Service Personnel Qualifications; Bruker Service and Transport

3-+/2*'+#,-%
• Click on
• Set the cursor line, starting at the left of the spectrum, to the left of the first peak to be
integrated, click the left mouse button and drag the cursor line to the right of the peak, then
release the mouse button.
•
• Repeat the previous step for the remainder of the peaks
•
• Note: the first peak integrated will be assigned an area of 1.000.
• To change the integration values, right click on the integration mark below the peak, and select
Calibrate Current Integral from the menu that appears. Type in the new value of the integral
from the dialog box that appears.
•
• Click on to save the integration regions.
##
# # ## # # # # #
#######
## #
## #
# #####
# # ## # # ## # # ##
## ## # # ### #
&& & &
# # # # # # ## #
# # ## # # #
# ## # # #
# # # # ## # #
# # # # ## # #
####
# # # # ## # # ##
## #
# # ##
## # # # # # # #
# ## # #
# # # # ## # #