Description 1
12
ekr 500 web guiding controller EDV No.: MD.299.01.06 Chapter: 1
with removable control panel Date: 29.07.08 Page: 2/86
1.2 General
The start-up, maintenance and installation
instructions described in this operating manual
must be strictly adhered to!
• The ekr 500 web guiding controller must be mounted and
operated only according to the knowledge of the relevant
operating manual.
This will help avoiding hazards and preventing damages to the
controller caused by improper assembly or operation.
• This operating manual, and particularly the safety instructions
must be observed by all persons working on or with the ekr 500
controller.
• Before operating the system for the first time as well as
before carrying out maintenance work you must read the
safety information provided by chapter 1.7 of this manual!
• Changing or loading firmware on this system must be carried
out exclusively
by BST personnel or personnel duely
authorised to do so by BST. Non observance of this may
cause the loss of the warranty rights
!
• The values and data shown in this manual (e. g. in the display)
are to be considered as examples, unless otherwise expressly
stated.
• The current version of the operating manual for the web guiding
controller ekr 500 in all available languages can be found on the
Internet at the following address:
http://www.bst-international.com
!
To Next Page
Loading...
Need help?
General
