BT BT1000 - Speed dial setup and usage

If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
24 Speed dial
You can allocate a phone number to each of the
Speed dial buttons
to
WX
YZ
. Button is
pre-programmed with 1571 but you can replace
it with an entry of your choice. Once a Speed dial
entry has been stored you can simply press and
hold the Speed dial button to automatically dial the
number stored under it. To delete or edit a Speed
dial entry, simply follow the instructions to store a
new number and this will overwrite the old entry.
Save or edit a Speed dial entry
1. From the home screen, enter the phone number
you want to store.
2. Press and hold the Speed dial button
AB
C
to
WX
YZ
you want to store the number under. You will hear
a confirmation tone once the number has been
successfully stored.
3. To change any of the numbers that you have stored,
just repeat 1 and 2 above.
Dial a Speed dial entry
1. Press and hold the Speed dial button
to
WX
YZ
under which the entry you want to dial is stored.
The number will be dialled automatically.