If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 45
Time saver
When you ring in to access your
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after 10
seconds. If you don’t have new
messages it will answer after
20 seconds. This means you
can hang up knowing that you
have no new messages, saving
you the time and the cost of
the call.
For compatibility with BT 1571
(or another voicemail service)
Make sure the answer delay is
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
delay should be less than on
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
Set the answer delay
1. Select Menu, Answer Phone is displayed, press
Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight either Ans. & record or
Answer only and press Select.
4. Answer delay is displayed, use
or to display
the number of rings you want (0-9 rings or Time
saver) and select Save. Saved will be displayed.
Set the maximum message length
You can set the maximum length that an answer
machine message can be: 1 minute, 2 minutes or 3
minutes. The default setting is 3 minutes.
1. Select Menu, Answer Phone is displayed, press
Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Ans. & record and press
Select.
4. Press
to display Max. msg length and then
press
or to select the length you want and
select Save. Saved will be displayed.
To Next Page
Loading...
