If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 51
Memory full
If there is only 10 seconds of
memory capacity left when a
caller is leaving a message they
will hear, “Please complete your
message within 10 seconds.” If
a caller is still leaving a message
when the memory expires they
will hear, “Memory full. Thank
you for calling”, and the call will
be ended.
If your answer machine
memory becomes full and it is
set to Answer and record it will
automatically switch to Answer
only mode. Once messages
have been deleted and there
is memory available again, the
machine will revert to Answer
and record mode (unless
you have changed the mode
yourself to Answer only using
the handset menu).
You will need to delete
messages before your answer
machine will be able to record
new ones. To delete old (played)
messages, see page 49 and 51.
Message playback using the base
Press
. If you have messages they will be played,
new (unplayed) messages first followed by old
(played) messages.
During playback:
Press
to stop playback. The base will return
to idle.
Press
to pause and resume playback.
Press
to delete the message being played.
Press
to skip forward to the start of the next
message.
Press
to skip back to the start of the current
message.
Press
twice to skip back to the start of the
previous message.
Press
to increase or decrease the playback
volume level.
At the end of playback the base will return to idle
mode and messages will be renumbered to take into
account any deleted messages.
To Next Page
Loading...
