If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 53
You cannot turn Remote access
On until you have set a remote
access PIN.
The default setting is Off.
Select Clear if you need to
delete any digits.
Change the remote access PIN
1. Select Menu, Answer Phone is displayed, press
Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and
press Select.
4. Press
to highlight Change PIN and press
Select. You will be reminded that the access PIN is
used for both remote access and call control.
5. Enter your old 4 digit PIN and select OK.
6. Enter the new 4 digit PIN, select OK, then enter the
new PIN again and select OK. The display will show
New Access PIN saved.
Turn remote access on or off
1. Select Menu, Answer Phone is displayed, press
Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and
press Select.
4. On/Off is displayed, press Select.
The Remote Access PIN is also
used for the Call Control PIN.
To Next Page
Loading...
Need help?
General
