Before Initial Operation
© BT Industries AB 180424-040
13
Action to be taken in emergency
If the mast (load-handling unit) should fail to operate, remove the
SAS-ECU fuse inside the fuse box and you will be able to move
the vehicle by operating it similarly to a non-SAS model. Move
the vehicle to a safe location and ask a BT dealer for a repair.
If any phenomenon different from normal operations (failure to
run or the like), among others, should take place, ask a BT
dealer for an inspection.
Note:
Once a torque converter model has had its control lever abnor-
mal, it is impossible to manually operate the vehicle, which need
be towed, accordingly.
To Next Page
Loading...
