EasyManua.ls Logo

BT CARGO GT 15 - Fan Belt Inspection; Battery Electrolyte Check

BT CARGO GT 15
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Weekly Maintenance
© BT Industries AB 180424-040
46
Note:
1. The element should be replaced after washing six times or
after it is used for one year.
2. It is unnecessary to clean the inside element when cleaning
the double cyclone air cleaner (Option).
Only clean the outside element.
It is essential to replace both outside and inside elements, in
time of replacement.
Fan belt inspection
Inspect the fan belt for cracks, fraying and tension.
If any abnormalities are found, have the belt replaced or
adjusted at a BT dealer.
Refer to service data for tension.
Battery electrolyte check
1. The battery electrolyte should be between the upper and
lower levels (10 to 15 mm from the top of the plates).
2. If the electrolyte level is below the lower level, remove the
cap and add distilled water to the upper level through the
water inlet port.
CAUTION!
Be sure to use distilled water for battery electrolyte. Also, wear
protective glasses when working on the battery.
1 Evecuator valve
4Y Engine 1DZ-II, 2Z Engine

Table of Contents

Related product manuals