Switches and Levers
© BT Industries AB 180424-040
27
Body Components
Operator’s seat
The operator’s seat and seat belt are provided for your safety.
The seat can be moved back and forth for position adjustment
while the adjust lever is pulled upward.
Suspension seat
The seat suspension mechanism provides a comfortable seating
position according to the weight of the driver. The optimum driv-
ing position can be set using the knob and levers.
Seat slide lever
Use this lever to adjust the seating position forward / backward.
óRecliner adjust knob
Push the knob on the left to adjust the seat’s angle of recline.
ìWeight adjust knob
Turn the knob on the right of the seat clockwise to adjust for a
heavier body weight.
Turn the knob counterclockwise to adjust for a lighter body
weight. Adjustment can be made for body weights between
50 kg and 130 kg.
ö Seat belt
CAUTION!
After adjustment, lightly shake the seat forward and backward
to confirm that the seat is firmly locked in position.
Seat belt
To fasten your seat belt, pull it out of the retractor and insert the
tab into the buckle.
You will hear a click when the tab locks into the buckle. Pull on
the belt to make sure the buckle is securely latched.
The seat belt length automatically adjusts to your size.
Disconnecting method
• Push the release button and allow the belt to retract.
WARNING!
Buckle up. Your seat and seat belt can reduce the risk of seri-
ous injury or death in case of a truck tipover. You chances for
avoiding serious injury or death in a tipover are better if you
stay with the truck in the operator’s compartment.
To Next Page
Loading...
