Switches and Levers
© BT Industries AB 180424-040
24
Control lever
(Torque converter models)
Lever for shifting between forward and reverse.
Forward........................Push forward
Reverse........................Pull backward
The neutral position is halfway between the forward and reverse
position.
CAUTION!
The engine cannot be started unless the control lever is at the
neutral position.
Stop the vehicle before shifting between forward and reverse.
Horn button
• Press the button in the center of the steering wheel to sound
the horn.
The horn will sound even when the ignition switch off.
Lift lever
Raises and lowers the forks.
- Raise
Pull backward
- Lower
Push forward
The lifting speed can be adjusted by the degrees of accelerator
pedal depression and lever operating stroke.
The lowering speed can be adjusted only by the degree of lever
operating stroke.
Note: As long as the engine is killed, the fork does not move
down even if so operated.
1 Push
1 Raise
2 Lower
1 Forward
2 Reverse
To Next Page
Loading...
