Handling the BT DPF-II System (Option)
© BT Industries AB 180424-040
43
Inspecting SAS system
• Check the SAS system to make certain that it is functioning
properly.
1. Check and make certain that the buzzer will sound after
throwing the ignition switch to the ON position, and that the
buzzer will stop sounding in 2 seconds.
2. Check the mast to make certain that it can be properly tilted
either forward or backward and moved up. Besides, make
certain that the mast can automatically stop at its horizontal
position.
CAUTION!
If you should feel something abnormal even slightly, or when
the SAS warning lamp comes to blink, or once an error code
has appeared on the hour-meter display, immediately stop
operating the vehicle and receive an inspection by a BT dealer.
To Next Page
Loading...
