Switches and Levers
© BT Industries AB 180424-040
23
Integrated light and turn signal switch
This switch serves as both two-position light control and turn sig-
nal switch.
Light control switch
Irrespective of a key switch position, this switch allows you to
turn on and off lighting.
This switch has two positions. With the switch at each position,
the lamp comes on as shown below:
CAUTION!
Do not keep lamps such as head lamps kept on for a long time
when the engine is stopped.
It may cause overdischarge of the battery to make engine start-
ing impossible.
Turn signal switch
Makes the turn signal lamps blink.
Left turn.......................Push forward
Right turn.....................Pull backward
The turn signal lever returns automatically to the original position
after making a direction change.
Vehicular speed limiter
(Option)
The highest vehicular speed may be set within a range of 9km/h
to the maximum.
CAUTION!
Setting the highest vehicular speed beyond the range speci-
fied above will cause the speed controller warning lamp to
come on for warning.
Lamp name Step 1 Step 2
Head lamps —O
Side clearance lamps,
tail lamps (Option)
OO
Meter illumination lamp O O
1 Left turn
2 Right turn
To Next Page
Loading...
