Handling the BT DPF-II System (Option)
© BT Industries AB 180424-040
35
Pre-Operation Check
Pre-operation check
Pre-operation checks and weekly inspections are the responsi-
bility of the BT industrial vehicle user.
Be sure to perform a pre-operation check before beginning work
to ensure safety.
Item Inspection
Previously detected malfunctions Correct
Exterior Vehicle body, oil leakage,
water leakage, loose
parts, exterior damage
Wheels Tire pressure, wear or
damage, rims hub nuts
Lamps Lamp condition, damaged
lamps
Hydraulic oil Oil level, contamination,
consistency
Radiator Coolant level, antifreeze
requirement
Engine Oil level, contamination,
consistency, noise,
exhaust
Clutch Engagement, pedal, play
Brake pedal Pedal play, braking effect
Brake fluid Fluid level
Parking brake Operating force, braking
effect
Steering wheel Looseness, play, vibration,
veering
Horn Sound
Instruments Functioning
Load handling system Parts, oil leakage, crack-
ing, looseness
Make certain that the SAS
is functioning
Fuel Amount
To Next Page
Loading...
