If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Call control settings 27
Assign VIPs
1. Select Menu, scroll
to Call control and press
Select or
.
2. Enter the access PIN and select OK. Press
to
highlight VIP list and press Select.
3. Read the prompt and select Info, read the message
and select Yes. Your contacts list will be displayed.
4. To assign contacts as VIP, highlight the contact and
press
. Select additional contacts if required by
repeating above.
5. Select Options, Add selected will be highlighted,
select OK and the selected entries will be added to
your VIP list.
Change the access PIN
1. Select Menu, scroll
to Call control and press
Options.
2. Enter the existing 4 digit remote access PIN. Press
to highlight Change PIN and press Select.
3. Once you’ve read the reminder message, select OK then
enter the existing 4 digit access PIN and select OK.
4. Enter the new 4 digit access PIN and select OK, then
enter it again when prompted and select OK. Access
PIN saved will be displayed.
You will be unable to use
BT 118500 from special
numbers when Premium Rate
calls are set to ‘Barred’.
You can set whether calls from
VIPs will still be allowed to
ring or not when the Do not
disturb feature is turned on. The
default setting is Allowed.
If set to Not Allowed all calls
will be presented silently. If set
to Allowed Calls from VIPs will
ring as normal.
If you’ve already added VIPs
to your VIP list the list will be
displayed when you enter the
VIP list menu. You can then
select
Options to add further
VIPs, remove VIPs or assign a
VIP ringtone.
The same access PIN is used for
remote access and call control.
To Next Page
Loading...
Need help?
General
