If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
74 Help
Phone doesn’t work
• Have you charged the handset battery for 24 hours? See page 5.
• Check that the mains power is correctly connected.
No dial tone or line cord error message displayed on screen
• Is the telephone cord plugged into the base and phone wall socket?
• Check that the mains power is correctly connected.
• Only use the telephone cord supplied with the phone.
Can’t make or receive calls
• Check that the mains power is correctly connected.
• The batteries may need recharging.
• Check that product call barring is not active – see Parental control on page 26.
• Has there been a power cut? If so, place the handset back on the base for ten
seconds and try again. If it still doesn’t work, disconnect the batteries and mains
power for ten minutes, then reconnect and try again.
You have a dial tone, but the phone won’t dial out
• If you’re connected to a switchboard, check whether you need to dial an
access code, see page 55.
Handset doesn’t ring
• The ringer volume may be switched off, see page 52.
• Check that the mains power is correctly connected.
• Do Not Disturb may be switched on, see page 24.
• Block nuisance calls may be switched on, see page 25.
• Make sure the handset is registered to the base, see page 70.
To Next Page
Loading...
Need help?
General
