To Next Page

To Previous Page

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp

58 Clock/Alarm

The default time format is

12 hour.

You must enter the full date:

day, month and year.

If you didn’t set the time and date when you ﬁrst

set-up your phone then you will need to do so

before you can set an alarm. The clock will also be

displayed on the handset screen in idle mode.

If you have subscribed to a Caller Display service the

time and month will be set when you receive your

ﬁrst call but you will still need to set the year.

Set the time format (12 or 24 hour), time and date

1. Select Menu, scroll

to display Clock/Alarm and

press Select.

2. Press

to highlight Time and date and

press Select.

3. Press

or to display 12 hour or 24 hour then

press

and enter the digits for the time, (you will

also need to select AM or PM if you chose 12 hour

format), then press

and enter the date. Select

Save.

Other manuals for BT Elements 1K

Questions and Answers:

Need help?

Do you have a question about the BT Elements 1K and is the answer not in the manual?

General