BT Elements 1K - Turn the Handset Tones on or off; Change the Handset Display Contrast; Change the Handset Name

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Settings 53
There are two handset tones:
keypad tones and confirmation
tones. You can turn these on or
off, the default setting is On.
Keypad tones: when turned on,
you will hear a beep after each
button press.
Confirmation tones: when
turned on, you will hear a tone
after each successful action
or after an error has occurred.
This does not include the
battery charging tone when the
handset is placed on the base/
charger, low battery or out of
range warnings or tones used in
calls such as Call Waiting or
Call Intercept.
There are 5 contrast levels
to choose from. The default
setting is Level 3.
A handset name can be a
maximum of 12 characters.
If you name your handset,
the handset number will be
removed, e.g. instead of saying
Kitchen 1 the name would just
be Kitchen. To revert back to the
default handset name (Handset
x), delete all the characters and
select Save.
Turn the handset tones on or off
1. Select Menu, scroll
to display Settings and
press Select.
2. Sounds is highlighted, press Select. Press
to
highlight Handset Tones and press Select.
3. Press
or to highlight On or Off for Keypad
tones and then press
to highlight On or Off for
Confirmation tones and select Save.
Change the handset display contrast
1. Select Menu, scroll
to display Settings and
press Select.
2. Press
to highlight Display and press Select.
3. Press
or to select the level you want, then
select Save.
Change the handset name
1. Select Menu, scroll
to display Settings and
press Select.
2. Press
to highlight Handset name and
press Select.
3. Edit the name by selecting Clear to delete
the characters, then enter the new name and
select Save.