The Block button
The Block button can be used in three ways to block nuisance calls to your phone.
• Incoming call – when you get a call, it’ll show on the display screen. Pick up the
handset to hear the caller’s announcement. If you don’t want to take the call,
press
. The caller will be advised that their call is not accepted and the call will
be disconnected.
• During a call – if you’ve already answered an unwanted call, press
.
If the number is displayed, you’ll be asked if you want to block it from calling
again. Pressing Yes will end the call and add the number to the Blocked list.
Press No to go back to your caller.
• In idle mode – use
to get to the Call Control menu.
Note: The Block button cannot be used to block incoming calls from saved
contacts or speed dial numbers.
How do I accept, block or send a call to the answer phone?
When a call comes through and is announced:
• press
to accept the call from this number once
• press
to always accept calls from this number
• press
or to block all calls from this number
• press
to send the call to the answer machine
• or if you don’t want to take the call, press the red
button.
Switching it on and o
When BT Call Guardian is switched on, it’s on for whichever mode you’ve chosen.
To Next Page
Loading...
