BT HALO - Configuring call settings

Settings 47
47
Call settings
1. When you’ve opened the main menu, press Down on the
button to get to
Settings. Press Left option button
.
2. Press Down on the
button to get to Call settings, then press Left option
button
.
3. You can then choose to switch Auto answer, Auto join calls, First ring and Auto
end calls
Left option button
to save.
Auto Join
• ON (Default): When Handset 1 is busy on a call, if you press the
on Handset
2, you will be given the option to join the call in progress on Handset 1.
• OFF: When Handset 1 is busy on a call, if you press the talk key on Handset 2, you
will not be given the option to join the call in progress on Handset 1.
First Ring
• OFF (Default): When BT Halo
®
receives a call on the landline, BT Halo
®
will delay
ringing, until the Caller ID (an hence any contact matching) has been displayed
• ON: When BT Halo
®
receives a call on the landline, BT Halo
®
will start ringing
straight away, the Caller ID (an hence any contact matching) will be displayed
when it is received by BT Halo
®
.
Auto Answer
• OFF (Default) – When BT Halo
®
receives a call, picking the Handset up from
the BT Halo
®
base, will not cause the call to be answered. The user will have to
additionally press the
button.
• ON - When BT Halo
®
receives a call, picking the Handset up from the BT Halo
®
base, will cause the call to be answered.