My Blocked and Allowed lists
Your Blocked and Allowed lists are the numbers that BT Call Guardian should
either block or always let through to you. Your Halo phone’s saved contacts are
automatically allowed. You can add numbers to a list as they come through or by
using the Call Control menu. Here’s how to do it:
1. When you’re on the home screen, press
.
press OK.
3. You’ll see BT Call Guardian. Press OK again.
4. Use
Block numbers to add a number to the Blocked list or Allow
numbers for the Allowed list and press OK.
5. When Add number is displayed, press OK.
6. Then type the full number you want to Block or Allow and hit Save.
You can delete the lists by following steps 1 to 4 above and then choosing Delete
all. But if you do, any calls you previously blocked or allowed will have to go back
through BT Call Guardian.
Do Not Disturb
When Do Not Disturb is switched on, your calls will get through and show on the
screen but your handset won’t ring and the handset display won’t light up. Here’s
how to switch it on.
1. When you’re on the home screen, press
.
2. Type in your access PIN (the default PIN is 0000) and then press OK.
Call control settings
To Next Page
Loading...
