Changing the base ringtone melody and volume
1. Open the main menu and then press Down on the
button until you get to
Settings. Press Left option button
.
2. When you see Base settings, press Left option button
.
3. Ringing will be highlighted. Press Left option button
.
4. Press Left or Right on the
button to choose between 5 melodies.
5. Press Down on the
button until you get to Volume. Press Left or Right on the
Left option button
to save.
PBX access code
If you’re connected to a switchboard, you might need to enter an access code,
like 9, before you dial a number. Your BT Halo
®
can store an access code to be
automatically dialled before each number.
1. Open the main menu and then press Down on the
button until you get to
Settings. Press Left option button
.
2. Press Down on the
button until you get to Base settings, press Left option
button
.
3. Press Down on the
button to highlight PBX code and press Left option
button
.
4. Type the number you want to use, then press Left option button
to save.
To Next Page
Loading...
