If you’ve bought a BT Halo
®
multipack, they’ll come already registered to the
base. But if you buy another handset separately, you’ll need to register it before
you can use it.
Registering an additional handset
1. Open the main menu and then press Down on the
button until you get to
Settings. Press Left option button
again.
2. Press Down on the
button until Registration is highlighted, then press Left
option button
.
3. When you see Register, press Left option button
to select it.
4. Press and hold
button on the base, then wait to hear a beep.
5. Press Left option button
on the handset. The handset will
start registration.
6. You’ll be asked to enter your system PIN if it was changed from the default 0000.
When you’ve done this, press Left option button
to complete.
You’ll have two minutes to complete the registration process.
De-register a handset
1. Open the main menu and then press Down on the
button until you get to
Settings. Press Left option button
again.
2. Press Down on the
button until Registration is highlighted, then press Left
option button
.
3. Press Down on the
button to highlight De-register. Press Left option
button
.
Using additional handsets
To Next Page
Loading...
