Please note: When your mobile is paired with BT Halo
®
it will always show in the
paired devices menu. If it is paired and connected, i.e. within range of the BT
Halo
®
base (with Bluetooth switched on), the Bluetooth icon
will show on
the home screen allowing you to use all the Bluetooth features.
4. You’ll then be asked if you want to edit the name of your mobile from BT Halo
®
.
Make your changes and press Left option button
.
5. Next you’ll be given the option to Import contacts from <mobile device name>.
To do this, press Left option button
on your BT Halo
®
.
Please note: Your mobile may ask you to allow BT Halo
®
to access your contacts.
Importing may take a few minutes depending on the number of contacts, so you
may want plug your mobile into a power source to avoid running out of battery
during the process.
6. When the import is complete your BT Halo
®
will display a success message, but
will still need to synchronise with the base and additional BT Halo
®
handsets.
As a result some functions may not be available until synchronisation is complete.
Viewing already paired devices
1. Open the main menu, scroll to Bluetooth, press Left option button
.
2. Paired devices will show, press Left option button
. A list of paired devices
will show on the display screen.
To Next Page
Loading...
