BT HALO - Turning the Message Alert on or off; Turn Call Screening on or off

Answer machine 42
42
Turning the message alert on or o
1. Use the steps above to navigate to the Answer Phone menu and press Left option
button
.
2. Press Down on the
button until you see Settings and press Left option
button
.
3. Press Down on the
button to get to Ans. & record and press Left option
button
.
4. Use the Up or Down on the
button to get to Message alert. Press Left or
Right on the
button to switch between On and O, then press Left option
button
to save your change.
When the message alert is set to On, the base will beep at regular intervals.
The default setting is On.
Turn call screening on or o
1. Open the menu and press Left option button
when you see Answer Phone.
2. Press Down on the
button to get to Settings and press Left option button .
3. Use the
button again to get to Call screening and press Left option button .
4. Use the
button to choose between the handset or the base and press Left
option button
.
5. Press Left or Right on the

Left option button
.
Please note: to adjust the base call screening volume, go to the Call screening menu
(as described in Step 3 above), choose BaseVolume. Press
Left or Right on the

Left option button
to save.