Your BT Halo
®
has Bluetooth functionality
that lets you pair your mobile and take
and make calls from both.
You’ll need to have your mobile close to
your BT Halo
®
base to use this feature as
the Bluetooth functionality is in the base
of your new BT Halo
®
, not the handset.
Here’s how to use it…
Bluetooth
®
Pairing a new mobile and importing your contacts
It’s essential to have your mobile phone unlocked throughout this process.
1. Open the main menu and press Up on the
button until you get to Bluetooth.
Press Left option button
. Pair new device will be highlighted. Press Left
option button
on your BT Halo
®
.
2. Then go to the Bluetooth settings menu on your mobile to look for your BT Halo
®
.
It might take a few seconds for your BT Halo
®
to appear in the list. When it does,
type in the access code you’ve set (or 0000 if you haven’t chosen one yet).
Paired with <device> will
show on the BT Halo
®
screen. On your mobile phone screen, BT Halo
®
will be
shown paired and connected.
Set up
Please set the
time and date
to start using
your telephone
OK
To Next Page
Loading...
