BT LPE200 - Page 10

2- 2 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Technical data – M4 LWE 180/200 LPE 200
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
Wheels
Drive wheel, mm Dia 215x70 Dia 215x70 Dia 215x70
Axle pressure without load, kg 200 374 374
Axle pressure at rated load, kg 650 565 565
Tightening torque for wheel bolts, Nm 65 Nm 65 Nm 65 Nm
Fork wheel, mm Dia 85x75 Dia 85x75 Dia 85x75
Axle pressure without load, kg 2x40 (240) 2x65 (240) 2x65 (240)
Axle pressure at rated load, kg 2x710 (240) 2x790 (240) 2x790 (240)
Support castors, mm Dia 125x40 Dia 125x40 Dia 125x40
Axle pressure without load 2X70 (240) 2X75 (240) 2x75 (240)
Axle pressure at rated load, kg 2x80 (240) 2x210 (240) 2x210 (240)
Hydraulic system
Output, kW 1.2 2.2 2.2
Duty cycle,% 10 10 10
Minimum carbon brush length, mm 7.5 12 12
Minimum commutator thickness/diameter, mm 4.75 4.7 4.7
Pressure at rated load, bar 110 150 150
Overflow pressure, bar 130 170 170
Pump flow, litre/minute 4.7 4.6 4,6
Tank volume, litre 0,5 1,0 1,0
Oil type:
at normal temperature
at temperature < -15
o
C
Hydraulic oil
ISO-L-HM32
ISO-L-HV32
Hydraulic oil
ISO-L-HM32
ISO-L-HV32
Hydraulic oil
ISO-L-HM32
ISO-L-HV32
Fuses
Drive motor circuits, A 125 125 125
Pump motor circuits, A 125 125 125
Control circuits, A 7,5 7,5 7,5
Model LWE180 LWE200,
LPE200-6
LPE200-8