EasyManua.ls Logo

BT LPE200 - Part Numbers; Transistor Panel; General

BT LPE200
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10- 46 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical systems – 5000 LPE 240
Part numbers
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
10.7 Part numbers
Press S18 and turn S17 to on at the same time.
Press S18 until you read Pn= partnumbers.
You have now choosen Pn= part numbers the symbol “D” on display
will be highlighted to indicate what’s currently shown on display. In
the start the Pn = part number complete unit will be shown.
By scrolling with the L1 you can get the following information:
SPn= Software part number.
HPn= Hardware part number.
HSn= Hardware serial number.
10.8 Transistor panel
10.8.1 General
Curtis 1243 is a regulator for controlling shunt motors. Varying the volt-
age applied through the armature primarily controls the speed. The
voltage is varied through use of pulse-width modulation (PWM). This
involves varying the “on” time of the MOS-FET transistors regulating
the armature current.
Switching of the rotational direction is achieved by switching the polari-
ty on the field winding (S1-S2). The regulator is fitted with a four-quad-
rant transistor bridge for the field winding and a single-quadrant transis-
tor bridge for the armature winding.
A
B
C
DE
MODEL
STATUS
SERIAL
VOLTAGE
CURRENT
M
A1 A
2
B+ M-
S1 S2

Table of Contents

Related product manuals