Preventive maintenance – P2 LPE 240
Maintenance schedule
Order number Date Valid from serial number T-code
225553-040 2005-05-11 723984- 660, 661, 662, 497
© BT Europe AB Service Guide LWE180, LWE200, LPE200, LPE240 5- 1
5- Preventive maintenance – P2
LPE 240
5.1 Maintenance schedule
I: Inspect, correct and replace if necessary. T: Tighten C: Clean L: Lubricate
M: Measure, correct if necessary
Pos.
no.
Work to carry out
Interval in hours - may vary due to ap-
plication
5 20 80 500 1000 3000
Interval in days/weeks/months - may
vary due to application
1d 1w 1m 6m 12m 36m
0000. Chassis
0000.1 Check all links and spiral pins I
0000.2 Check for damage to the platform. I
0000.3 Check the cover locks I
0000.4 Check the finger guard I
0000.5 Check signs and stickers I
0000.6 Push in grease in the grease nipples
I/L
6
0380 Fork carriage
0380.1 Check for crack formation and damage I
0380.2 Check the play in bushings and links I
0380.3 Push in grease in the grease nipples
I/L
6
I/L
0380.4 Check the lift limit switch I
1700. Motors
1700.1 Check for loose connections
I/T
1
I/T
1700.2 Check the carbon brushes in the drive motor M
1700.3 Clean the drive motor C
1700.4 Tighten the mounting bolts
T
2
1700.5 Check for abnormal noise in the bearings I
1700.6 Check the steering motor carbon brushes
(Option)
M
To Next Page
Loading...
