Controls and instruments truck with 180° steering
© BT 237077-040
41
Parameter control (F)
When checking the set parameters the indicator window (F) will
light. See “Display and programming”.
Parking brake indicator (H)
The indicator window is lit when the parking brake is applied.
Stabiliser Indicator (I)
(Option)
The light flashes when the stabilisers have left their inner posi-
tion.
Drive wheel indicator (J)
(Option)
The position of the drive wheel and the truck’s direction of travel
are indicated by one of the arrows in the diagram. When the
opposite direction is selected without changing the position of
the drive wheel the opposite arrow will light.
Travel control (6)
• Drive forwards/backwards by moving the travel control for-
wards/backwards. The travel speed is infinitely variable.
Horn (7)
The horn sounds as long as the button is pressed.
Brake lever for the travel brake (8)
• Brake by pressing the button.
• The brakes are applied in two stages, first gentle braking and
then after a set delay full braking.
To Next Page
Loading...