Controls and instruments truck with 180° steering
© BT 237077-040
42
Controls for control console position (9)
The control console is continuously vertically adjustable to pro-
vide a comfortable operating position.
• Loosen knob (A) and the control console can be adjusted to a
suitable height.
• Tighten the knob (A) after adjusting.
To obtain a more comfortable operating position, the control
console can be adjusted to take into account the selected travel
direction. The control console is held in place with a gas spring.
• Turn the control console clockwise when operating in line with
the fork direction.
• Turn the control console anti-clockwise when operating in the
opposite direction.
Ensure that the operating position is adjusted often in order to
reduce the load on the body.
Safety pedal (10)
Place your foot on the foot pedal when you wish to drive the
truck. The foot pedal features an integrated automatic parking
brake and safety switch. This means the parking brake is acti
-
vated if you do not stand on the pedal.
WARNING!
Risk of being thrown from the truck.
The parking brake is actuated if you left foot is removed from
the foot pedal while driving.
Only move your left foot from the foot pedal if you intend to
stop the truck in an emergency.
NOTE!
Risk of crushing.
Risk of crushing exists if any part of the body is outside of the
operator’s cab.
Always ensure that the whole of your body is inside the protec-
tive cab.
The parking brake does not release until you have selected a
travel direction.
Cover lock (11)
• Loosen the screw and swing out the entire motor casing to
inspect the motor.
To Next Page
Loading...