8
Digital DMR and Analog UHF/VHF Two Way Radio
3.4
Installing the Additional Speaker/Microphone (Optional)
Pry open the rubber MIC-Headset jack cover and then insert the Speaker
/ Microphone plug into the double jack. Push the plug straight in, do not
have at an angle, as damage may occur.
3.3 Installing / Removing the Belt Clip
a.
Installing the Belt Clip: Place the belt clip above the corresponding holes
on the back of the radio, and screw it into place clockwise with the two
supplied screws.
b.
Removing the Belt Clip: Unscrew counter-clockwise to remove the belt
clip.
3. PREPARATION
To Next Page
Loading...
