13
Digital DMR and Analog UHF/VHF Two Way Radio
The Switch operations listed are factory default functions. They can be
modied in CPS or by the front panel menus for other functions. If you do
not get the operations shown, check to see if function has been changed in
CPS by reading the radio and reviewing options.
4. RADIO OVERVIEW
4.4 Combination Key Function
+ number key operation:
Press key and hold until the LCD display “Next Please Press Dial Key”,
press the number key, it will perform the programmed function.
Combination key function shall be setup in PC software-Public-Hot key.
4.3 Hot Key Setting for PF1, PF2, PF3, P1, P2
Call
Analog
Should edit the analog quick call rst, then choose analog in
the hot key set. Press the key to transmit 2Tone/5Tone/DTMF
to start the analog quick call.
Digital
It allows to select a contact from the digital contact list, press
the key to switch the channel to the contact temporary. It will
switch back to the original contact after the group/personal
call hold time.
Menu
SMS Quick access to Messages in the menu
New Msg Quick access to New Msg in the Menu - Messages
Hot Text Quick access to Quick Text in the Menu - Messages
Received SMS Quick access to Inbox in the Menu - Messages
Send SMS Quick access to Out box in the Menu - Messages
Contact list Quick access to Contact list in the Menu - Contacts
Manual dial Quick access to Manual Dial in the Menu - Contacts
Call Log Quick access to Call Log in the Menu
Dialed Calls Quick access to Dialed Calls in the Menu - Call Log
Received Calls Quick access to Answered Calls in the Menu - Call Log
Missed Calls Quick access to Missed Calls in the Menu - Call Log
Zone Quick access to Zone in the Menu
Radio set Quick access to Radio Set in the Menu - Settings
Enter radio Menu-Settings-Radio Set-PF1, PF2,PF3,P1,P2,sub menu.
Users can choose settings for Hot Keys 1-6.
Hot Key function
details must be setup in PC software – Public - Hot key.
To Next Page
Loading...
