BTECH DMR-6X2 PRO - Scan

21
Digital DMR and Analog UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
7.5 Scan
In the PC software – Public – Scan list, it allows you to save 250 scan lists, and
to program the required scan lists and write it into the radio.
Switch the radio to channel mode, as the scan list is only valid in the channel
mode.
7.5.1 Turn On Scan
a.
Press (Menu) to enter the main Menu.
b.
Select "
SCAN
".
c.
Select "
Scan ON/OFF
".
d.
Select "
ON
", the radio will start to scan, press any key to stop to scan.
7.4.2 Add A Zone
7.4.3 Delete A Zone
(1)
Press (Menu) to enter main Menu.
(2)
Select "Zone".
(3)
Select "Add Zone".
1. Select "Edit name"
Input zone name by keypad, press key to delete. After entering the
name, press to conrm and store.
2. Select "Edit Chan"
Select "Add Chan" then select a channel from the list.
3. Select "Save": press key to store a new zone.
(1)
Press (Menu) to enter the main Menu.
(2)
Select "Zone".
(3)
Select a Zone from the zone list.
(4)
Select Delete Zone to delete current the zone.
(2)
Select "Zone".
(3)
Select a zone from the zone list, radio will change to selected zone.