38
Digital DMR and Analog UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
7.11.1 Response and Save a call in Digital Monitor Mode
During Digital Monitor, when user receives a call with unmatched ID, press
key, the screen will display "
Monitor Response Setup Successfully
",
press [PTT] key will reponse to the call.
Press key, the radio will remind you to choose a Zone, press /
key to choose a Zone, press select key to save the new channel to the
Zone.
7.11
Digital Monitor
a.
Press (Menu) key to enter main menu, press / key to
choose
Digi Moni
function.
b.
Press Select to enter
Digi Moni
menu, press / key to choose a
sub menu.
1)
DigiMoni Switch
off: Turn off Digital Monitor
Single Slot: Monitor the current TS
Double Slot: Monitor TS1 and TS2
2)
DigiMoni Cc
Any Cc: Monitor any color code
Same Cc: Monitor the same color code
3)
DigiMoni Id
Any Id: Monitor any TG
Same Id: Monitor the same TG
4)
Slot Hold
Off: Turn off the slot hold
On: Turn on the slot hold
It is recommended to turn on "slot hold" when using Digi monitor double slot-
monitoring both time slots. When the signal disappears from the active time slot,
the hold function will remain on that time slot for a few seconds until all activity
disappears.
c.
Press Select to enter the sub menu and set up.
To Next Page
Loading...
