BTECH DMR-6X2 PRO - Page 43

37
Digital DMR and Analog UHF/VHF Two Way Radio
(3)
Ana APRS Info
The received analog APRS information will be saved in radio for review.
Click on "Ana APRS Info" will show the received APRS information.
Clicking on "Delete All" will clear the information.
(4)
Digi APRS
PTT Upload
: Set the PTT transmit method.
●
Off: No APRS data transmission.
●
On: Transmit DMR APRS when the user releases the PTT.
Report Channel
: Allow user to select a channel to transmit the DMR APRS,
Availability to set up to 8 report channels in CPS-APRS-Digi page rst.
Upload Slot
: Allow user to select a Time Slot to transmit the DMR APRS
.
●
Channel Slot: It uses the Time Slot of current channel
●
Slot 1: Use Time Slot 1
●
Slot 2: Use Time Slot 2
7. MAIN MENU FUNCTIONS
(5)
Digi APRS Info
The received APRS information will be saved in radio for review.
Click on "Digi APRS Info" will show the received APRS information.
Click on "Delete All" will clear the information.
Upload Power
: Set the transmit power.
Upload frequency
: Set the transmit frequency.
Upload text
: Set the text to be shown on aprs.
(6)
Intervals Set
This function allows you to set the analog APRS or DMR APRS auto
transmit at xed times.
(7)
Upload Beacon
GPS Beacon
: The APRS will transmit the GPS data, only if the GPS is set
to on rst, then GPS must also successfully lock on the satellites.
Fixed Beacon
: The APRS will transmit the xed beacon data. Someone
can transmit the xed beacon without setting the GPS on. The xed beacon
location information should be set in CPS rst.
Note:
More setup are available by PC software only.
CPS-Tools-Options-
APRS
, you have to check on the APRS box rst to get APRS menu added
to the left Digital menu.
(APRS is a registered trademark of Bob Bruninga, WB4APR)