22
Digital DMR and Analog UHF/VHF Two Way Radio
7.6 Roaming
The roaming function enables users to search the roaming channel list by
locking on the repeater with strongest signal.
(1)
Roaming On/Off
Allows you to turn on the roaming manually. After the roaming is nished, it
will return to the off state.
** Manually Roaming is a onetime action only.
(2)
Roaming Zone
Select
Roaming Zone
: select a Roaming Zone from the list to set it as
active zone. You can also scroll down the list of Zones and select Add
Channel to add a new channel to the current Roaming Zone and set the
parameters
.
Select
Add Channel
: Add a new roaming channel to the current zone.
New Roam Ch
: Allows you to modify the RX frequency/TX frequency/
CC/TS/CH name for the roaming channel. Also allows you to remove the
roaming channel from the zone.
Edit Name
: Edit the zone name.
Select Zone
: Select the roaming zone for the current channel.
Delete Zone
: Delete the roaming zone from the current channel.
(3)
Auto Roaming settings
Set the fixed time waiting interval to begin automatic roaming when the
repeater cannot be found, roaming will begin at the end of this time.
Fixed Time Set
: The roaming will be started at preset xed time or set to off
.
7.7 Settings
7.7.1 Radio Set
1.Voice Func
(1)
Key Tone
Beep On: The radio will beep when you press the keypad.
Beep Off: No beep when you press the keypad.
(2)
KeyTone Vol
Adjustable: The volume changes with the volume knob.
Level 1-16: Fixed volume
(3)
Digi Idle
Set on if you want a tone when the digital channel is free.
7. MAIN MENU FUNCTIONS
To Next Page
Loading...
