BTECH DMR-6X2 PRO - Adding a New channel; To Delete a Channel

15
Digital DMR and Analog UHF/VHF Two Way Radio
5. BASIC OPERATIONS
5.7 Adding a New channel
5.8 To Delete a Channel
(1)
Press (Menu) to enter main Menu.
(2)
Select "Settings".
(3)
Select "Chan Set".
(4)
Select "New Chan".
(5)
Input the channel number by keypad, press to conrm.
(6)
Select a zone from zone list, then Conrm To Save. The radio will start
channel saving, and saving is completed when it displays "Saved".
(7)
Now select the new channel in the radio and go to Channel Settings
menu to set up all the new channel's parameters.
Fast saving a new channel:
Note:
Hold (Menu) until displays "Next Please Press Dial Key", then
press [P1] key to create a new channel using steps 5 to 7 above.
(1)
In channel (MR) mode, press (Menu) to enter main Menu.
(2)
Select "Settings".
(3)
Select "Chan Set".
(4)
Select "Delete Chan" to delete current channel.
Fast delete a channel:
Note:
Hold (Menu) until displays "Next Please Press Dial Key", then
press [P2] key to delete current channel.
There are four possible settings that can be selected in the CPS channel:
(1)
Always Allow: The user can transmit all the time.
(2)
Channel Free: The radio can transmit only if the channel is free.
(3)
Different Color Code: The radio can transmit if the channel is free, but
the color code is mismatch.
(4)
Same Color Code: The radio can transmit only if the channel is free and
the color code matches.