12
Digital DMR and Analog UHF/VHF Two Way Radio
4. RADIO OVERVIEW
Max VOL Set
In standby, press the key programmed as "Max Volume", will enable
users to set the maximum RX volume.
Slot Set
Choose Slot for current channel, this function is only valid in repeater mode.
Ana SQ Set Set the squelch level in analog mode.
Roaming
In standby, press the key programmed as "Roaming" to search and lock
on the repeater with strongest signal. (Note: After lock on a repeater,
the radio will return to last frequency only after channel or frequency is
changed. The repeater frequency list must preprogrammed in CPS.)
Zone Select
In standby, press the programmed "Zone Select" key, it will allow you
input the zone number and then press conrm key will switch to the
zone.
Roaming Set Sets Roaming Function.
FixTime Mute
Press the key to mute the radio in set time. The mute timing should be
set in CPS -Optional Setting - Other -Mute Timing.
CTC/DCS Set Set the CTCSS/DCS for analog channel.
Aprs Type Choose Aprs Type for current channel.
APRS Set
Sets APRS Function.
TBST Send Send the TBST Tone.
BHT On/Off Enable / disable the bluetooth function.
Gps On/Off Enable / disable the GPS function.
Ch.Name
Switch between channel name display and frequency display for the
current channel.
Aprs Send Manually transmit the APRS at the current channel.
Ana Aprs Info Fast access the analog aprs info menu.
GPS Roaming
Enable / disable the GPS roaming function. GPS roaming function
allows the radio switches to a zone when GPS positioning is within the
preset radiation of coordinates.
To Next Page
Loading...
