25
Digital DMR and Analog UHF/VHF Two Way Radio
Orange: In standby, the channel and other information will display color in orange.
Red: In standby, the channel and other information will display color in red.
Yellow: In standby, the channel and other information will display color in yellow.
Green: In standby, the channel and other information will display color in green.
Cyan: In standby, the channel and other information will display color in cyan.
Blue: In standby, the channel and other information will display color in blue.
(9)
CH Color A
Set color for the band A channel display.
(10)
CH Color B
Set color for the band B channel display.
(11)
Zone Color A
Set color for the band A zone display.
(12)
Zone Color B
Set color for the band B zone display.
(13)
Main Ch
Channel A: The upper displayed channel will be set to become the main channel.
Channel B: The lower displayed channel will be set to become the main channel.
(14)
Sub Ch Switch
Sub Channel On: Turns on the sub channel, and the radio will display both channels.
Sub Channel Off: Turns off the sub channel, and the radio will display the
main channel only.
3.Key Func
(1)
Key Lock
Manual Lock: Long press the key to lock the keypad. Press key,
then press the key to unlock the keypad.
Auto Lock: Radio will auto lock the keypad when in standby for a while.
Press key, then press the key to unlock the keypad.
Notice:
To get the key lock function working, some options should be set
ON in CPS -> Optional Setting -> Key function rst.
Knob Lock: Set On to lock the knobs.
Keypad Lock: Set On to lock the kyepad.
Side Key Lock: Set On to lock the PF1,PF2 and PF3(top blue key).
Forced Key Lock: Set On to prevent the key from unlocked. When this
function is ON, the keys are not be able to unlock manually.
7. MAIN MENU FUNCTIONS
To Next Page
Loading...
