29
Digital DMR and Analog UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
7.7.2
Chan Set
Channel set menu: Main Menu- Settings - Chan Set. The channel set
menu will change accordingly to the channel type. When the channel type
is digital, it will automatically hide the analog menus.
.
※
Chan Set (Digital Channel)
(1)
New Chan
Allows creation a new channel and save current set up to the new channel.
a. Select "New Chan", then input a new channel number and conrm.
b. Input channel name and conrm.
c. Select a zone and confirm. The new channel will be saved to the
selected zone.
(2)
Delete Chan
Allows to delete the current channel.
a. Select "Delete Chan",the radio will conrm by asking " Delete? "
b. Press conrm, the current channel will deleted.
Note:
After deleting a channel, the radio will move to the next channel.
(3)
Channel Type
A-Analog : Set up an analog channel
D- Digital : Set up an digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is digital.
(4)
TX Power
Set up the TX power for current channel.
(6)
Band Width
Only narrow band 12.5KHz for digital channel. Analog can be Wide band or
Narrow Band.
(7)
RX Freq
Input the RX frequency by keypad, click the Menu key to save, press P2
key to return.
GPS Check:
When GPS is positioning successful, enter this menu, select
GPS check to do the date & time correction automatically.
To Next Page
Loading...
