33
Digital DMR and Analog UHF/VHF Two Way Radio
(11)
Reverse
When this function is enabled, the RX frequency, TX frequency and
CTCSS/DCS encode/decode will be reversed.
(16)
Busy Lock
Always: Always allows transmissions
Different CDT: Will not allow transmit when receiving matched carrier but
unmatched CTCSS/DCS.
Channel Free: Will not allow transmit when receiving matched carrier.
(18)
DTMF Enc
Set a DTMF ID as the default call ID for the current channel.
Press the PTT key to transmit the selected DTMF ID.
Edit the DTMF ID in Menu or with the PC programing software.
(19)
DTMF Dec
Set a DTMF ID as the default receive ID for the current channel.
When the channel receives a signal with matched DTMF ID, the speaker
will open.
(20)
2Tone Enc
Set a 2Tone as the default call ID for the current channel.
Press the PTT key to transmit the selected 2Tone.
Edit the 2Tone in the PC programing software before it can be selected.
(21)
2Tone Dec
Set a 2Tone ID as the default receive ID for the current channel.
When the channel receives a signal with matched 2Tone ID, the speaker
will open.
(23)
5Tone Enc
Set a 5Tone as the default call ID for the current channel.
Press the [PTT] key to transmit the selected 5Tone.
Edit the 5Tone in the PC programing software before it can be selected.
(24)
5Tone Dec
Set a 5Tone ID as the default receive ID for the current channel.
When the channel receives a signal with matched 5Tone ID, the speaker
will open.
7. MAIN MENU FUNCTIONS
To Next Page
Loading...
