Operating Manual 53
Viewing Battery Activity
Viewing Maintenance Limits and Critical Limits
WARNING
You can change the range of maintenance limits and critical limits,
but we do NOT recommend this, because the limits have been
carefully determined by an engineer in your facility. Changing
them may cause battery failures to be missed, leading to a total
power outage when the uninterruptable power supply fails.
Action How to do it Picture
1
If not already
running, start BVM,
open a *.bvm file
and establish
communications.
a. From the Start menu, select Programs > BTECH > Battery Validation Manager 4.0
b. In the Location List window, click on a location file, then click OK.
c. From the BVM
software menu bar,
select
Communications>
Establish
Communications
with Controller.A
Communications
window will
appear.
To Next Page
Loading...
