T419S Indicator User Instructions 13
2.6 Adjusting screen contrast
When icons are on screen the bold box around an icon means it is the highlighted icon.
See the example below.
When a text list appears on screen the highlighted item is shown by a green bar over
the text. See the example below.
The main menu is made up of the User, About and Audit menus. See Chapter 4 for
complete information.
2.5.1 Escaping or exiting from a menu
In any menu you will have either UP or ESC keys listed on-screen.
If ESC is listed use it until it disappears then use the UP key until you are asked if you
want to save any changes or not. Highlight your choice and press ENTER to accept.
The indicator will reboot and return to the startup screen.
2.6 Adjusting screen contrast
To decrease or increase the screen contrast press and hold the UNITS key and press
the TARE (UP arrow) or SELECT (DOWN arrow) key repeatedly.
Esc
scroll up and down list then enter to select
Port 1
Port 2
Port 3
Serial
To Next Page
Loading...
Need help?
General
