To Next Page

To Previous Page

T419S Indicator User Instructions 27

6.1 Printed Preset Tare report example

Clr Tot This stands for Clear Total. If enabled, during normal operation the

totals for the active channel will be cleared after you press and

hold of the PRINT key for three seconds. The clearing will occur

after printing of the Totals (if enabled). The message cLr-tot will

flash on the display.

Print Select the destination the 200-channel report will be transmitted

to. Choices are: Port 1, Port 2 or USB. See a sample report

below.

Channel ID Gross Total Net Total Tare Total Transactions Units

1 111 1077.000000 1027.000000 50.000000 2 lb

2 0 0.000000 0.000000 0.000000 0 lb

3 0 0.000000 0.000000 0.000000 0 lb

4 0 0.000000 0.000000 0.000000 0 lb

5 0 0.000000 0.000000 0.000000 0 lb

6 0 0.000000 0.000000 0.000000 0 lb

7 0 0.000000 0.000000 0.000000 0 lb

8 0 0.000000 0.000000 0.000000 0 lb

9 0 0.000000 0.000000 0.000000 0 lb

10 1010 2966.000000 2524.000000 442.000000 3 lb

rESEt This clears the entire 200-channel database.

This completes the Supervisor menu. To return to normal mode repeatedly press the

ESC key to exit.

6.1 Printed Preset Tare report example

Tare Index Preset Tare

1 500 lb

20lb

30lb

40lb

50lb

60lb

70lb

80lb

90lb

10 0 lb

BTEK T419S User Manual

Other manuals for BTEK T419S