T419S Indicator User Instructions 21
4.1 User menu
4 Menus
The T419S three user accessible menus:
l User menu - Use to set Time, Date, Site ID, check Seal status and check
Archive information.
l About menu - Use to see information on the software, firmware, application,
serial number, options, ethernet and downloads
l Audit menu - Use this to check and/or print the calibration and configuration
counters.
The password for these menus is 111. Follow these steps to access and use these
menus.
1. Press and hold the SETUP key until …
the password entry screen appears.
2. Key in 111 and press the ENTER key …
This screen is displayed:
The bold box around the center image means that is the highlighted
menu item.
3. Use the Left and Right keys to highlight the menu you want to enter and press
the ENTER key. Below are the explanations for these menus.
4.1 User menu
When the User menu is selected, these choices appear:
Use the Left and Right keys to highlight the menu item you want to access and press
the ENTER key.
Time Set - Use the numeric keys to enter the correct time in the style chosen
below.
Style - Choose the style of time display from these choices:
l 12HR - Shows time in the 12 hour style
l 12HR-AP - Shows time in the 12 hour style with AM/PM
l 24HR - Shows time in the 24 hour style
Time Date Site ID Seal Archive
To Next Page
Loading...
Need help?
General
