24 T419S Indicator User Instructions
Menus
4.3 Audit menu
If you access the Audit menu you will see this menu:
Counter Config - See the number of configurations the indicator has undergone.
Calib - See the number of calibrations the indicator has undergone.
Print Use this to select which port to print the audit report through. The audit
report will contain both Config and Calib information. Choices are:
Port 1 Under Port 1 choose to print to a column or ticket printer.
Port 2 Under Port 2 choose to print to a column or ticket printer.
USB Printing to USB requires that a USB flash drive is connected
to the indicator host USB. Printing to USB will create a folder
on the flash drive and a comma separated file with the data.
You can exit the menu by following the instructions in Escaping or exiting from a menu
on page 13.
To Next Page
Loading...
Need help?
General
